Hydraulic Elevator
Hydraulic Home Elevator
When it comes to residential elevator systems, hydraulic drives are a popular choice for homeowners looking for quality, safety, and the ‘quietest’ ride.
Hydraulic home elevator systems utilize a ram or piston to raise and lower the car by filling or releasing fluid into an airtight cylinder. With more standard features and custom options than any other elevator on the market today, Symmetry’s Hydraulic Drive Residential Elevator system is the industry leader.
Unique in the market, no other company offers emergency battery-operated lowering, COP and hall stations digital position indicators, custom wood sills and energy-efficient LED lighting as standard features.
This drive system accommodates up to six stops, 50’0″ of travel and is equipped to hold up to 1,000 pounds.
Find a local Symmetry hydraulic elevator dealer to discuss your needs!
- Travel: Maximum of 50’0″ (minimum 12” between stops)
- Speed: 40 feet per minute
- Rated Capacity: 1,000 pounds
- Pit depth: 6” minimum (8” preferred)
- Stops: Two
- Opening: Single
- Overhead: Minimum of 7’10″ (94 inches) with a 7’0″ interior car height
- Warranty: Three-year limited parts
- Slack rope safety device
- Line rupture valve
- Motor controller supply disconnects (located in controller)
- Car light supply disconnects (located in controller)
- Pit stop switch
- Car-top stop switch
- In-car emergency stop switch and alarm
- Safety switch for car gates/doors
- Battery backup emergency car lights and alarm
- Electro-mechanical hoistway door locking devices (doors by others)
- Enhanced gate/bypass monitor
- Programmable Logic Controller (PLC)
- Non-selective collective automatic operation
- S.M.A.R.T. system (Self-Monitoring Alert Response Technology)*
- Car Operating Panel (COP) with LED floor position indicator §
- Recessed phone box (phone jack included) §
- Hall stations with call button and LED floor position indicator §
- Automatic car lighting
- Single floor designated car homing
- Uninterruptible Power Supply (UPS) for car lowering and automatic car gate/door operation (if provided) in the event of a power failure*
- Car size up to 15 square feet
- 7’0” interior car height
- Birch, Oak, or Maple flat veneer interior walls with flat ceiling
- Matching wood handrail
- Matching wood car sill
- Unfinished plywood floor with sill set for 3/4” (flooring by others)
- Two energy-saving recessed LED lights with Black trim rings
- Light Oak, Birch or White 7’0” laminate accordion door
- Modular 6-1/4 pound T-rail structure
- Car frame assembly
- 208/230 VAC, 60 Hz, 30 amp, single-phase power supply for motor controller
- 120 VAC, 60 Hz, 15 amp, single-phase power supply
- Code-compliant electrical disconnects included*
- Two 3/8″ 7 x 19 galvanized aircraft cables (14,400 lbs. breaking strength) with wedge rope shackles
- 80 mm diameter piston/102 mm diameter cylinder including 3/4 inch reducer bushing
- 3 HP submersed motor with 2-speed valve assembly
- Manual down valve for emergency lowering
- Up to six stops
- Single automatic push-button operation
- Custom car size up to 18 square feet**
- Custom car heights
- Shaker, Recessed or Raised panel car with flat ceiling
- Shaker, Recessed or Raised panel car with matching ceiling
- Four recessed LED lights with Black, White, Polished Brass, Brushed Nickel or Bronze trim rings*
- Factory-finished car
- Fixtures including COPs, hall stations, phone boxes and handrails available in:
- Polished or Blackened Stainless Steel
- Brushed, Polished or Oil-Rubbed Solid Brass
- Powder-coated Black or Vintage Bronze
- COP with integrated keypad phone
- Custom wood interiors
- Custom factory finish, Distressed*
- “Green” material alternatives and finishes for car interiors*
- 3/4 inch finished or unfinished installed hardwood car flooring
- Custom sill heights
- Buffer springs (requires minimum of 7-1/8 inch pit depth)
- Key switch for COP and/or hall stations
- Light curtain monitoring the car entrance
- Symmetry Safety 3-Panel car door
- Two or three speed car door or car and landing doors
- Enterprise collapsible gate
- Dark Oak, Chalk, Antique White, Cherry, Walnut or Black laminate accordion door
- Hardwood veneer accordion door
- Clear or Smoked acrylic panel accordion door
- Automatic car gate/door operator (not available on Enterprise collapsible gate)
* Symmetry Elevating Solutions exclusive
** May require approval from the local authority having jurisdiction and affect capacity
§ Standard finish is Brushed Stainless Steel, but multiple finishes available